• img1
  • img2
  • img3

+86-523-80235941

vicky@aokai.net.cn

Home > Exhibition > Content
Replace the dust filter bag steps

A. ensure that plate and plate on the walls have been cleaned to remove dust andother residue gravel.

B. ensure that the used dust bag/filter bag frame components have been removedfrom the plate hole and move (change filter bag has been used).

C. make sure dust bag frame is not bent, broken or burrs and other easily damaged bag defects.

D. ensure that the plate bore clean inside, and plate to ensure that the coil grooves accurately sealed.

E. interfaces ensure that the frame of the filter bag, bayonet firmly installed (for two keels and above).

F. Insert plate hole in the sleeve and metal ring placed on the plate.

G. special installation of the filter bag sleeve out of the box. These sleeves are cloth, is open at both ends, and the end is sewn with metal ring.

Contact Us
Jiangsu Aokai Environmental Technology Co.,Ltd

Address: No.80, Fuqian Road, Chengbei Industrial Park Economic Development Zone, Jingjiang City, Jiangsu Province, China

Tel: +86-523-80235941

Fax: +86-523-80235750

E-mail: vicky@aokai.net.cn

Copyright © JiangSu AoKai Environmental Technology Co.,Ltd. All Rights Reserved.
foottop